TPCA Show 2009

[Date held: 21st October to 23rd October, 2009]
We proceed to take part in TPCA Show 2009 after JPCA Show 2009.
We introduced updated data beyond the exhibition data of JPCA Show 2009. (updating will be scheduled at a later date.) Also, UNION TOOL CO. took part in the NPI presentation again this year.

Mechanical Components & Materials Technology EXPO Exhibition for Reference

[Date held: 24th June to 26th June, 2009]
In the section for measuring instruments, the digital device for PCB drills' quality control, Linear Instruments that are assembled with UNION TOOL CO. made crossed roller guides, In-process Instruments mounted with processing machine, etc, were displayed and demonstrated, respectively.
This year, the long seller, non-contact diameter measuring instruments have been added with submicron model (0.1µm=1/10,000mm), proving that development of products is continued to meet that time where precise measuring is demanded.

- Main Exhibition -

• Contact Diameter (overall length, ring depth) Measuring instrument series Digital Scale "DS-1, DS-1S, DS-2"
• Contact Linear instrument series Microfine "S1M-5, S1M-10, S1M-25"
• Non-Contact Drill Diameter Measuring instrument series Optech "OPTECH-M"
• New 0.1µm Resolution Non-Contact Diameter Measurement instrument "OPTECH-MS7"
• Non-Contact Spindle Runout Digital Indicator "OPTECH-RI-IV"
• Non-Contact tool tip point detector "OPTECH-Em"
• Non-Contact Laser Sensor "OPTECH-LS3080"
• Contact In-Process Diameter Measurement instrument "IPD-120"
• For Reference Thin-model In-Process Diameter Measurement instrument "IPG-50"

- Demonstration -

• Evaluation on continuous tip detection of high-speed rotating tools using Non-Contact Micro Tool Measuring Equipment "OPTECH-Me"
• Continuous measurement evaluation in water using Contact In-Process Thickness Measuring instrument "IPT-14S"

JPCA Show 2009

[Date held: 24th June to 26th June, 2009]
The demand for high accuracy, high efficiency and low cost drilling with resource saving and environment-responsiveness has rapidly increased. In such situation, UNION TOOL CO. exhibited new developed drills and routers to meet those demands. Also, UNION TOOL CO. took part in the NPI presentation again, this year.

- NPI Presentation-

• Cost Reduction strategy and Introduction to new developed PCB drills
  *NPI means 'New Product Introduction'

Exhibition Data
- Introduction of New Technology-
ULF Coated Drills
Feature of ULF coated drill (jpca2009_ulf-drill.pdf, Page1, 267KB)

Routing Performance
DCE Router ø2.0 Contour Routing Performance (jpca2009_diacoat-router.pdf, Page1, 185KB)

-Ultra-micro and Micro drills-

Package Substrate, Device Substrate
ø0.050 Ultra Micro-Hole Drilling Performance (jpca2009_0.050.pdf, Page1, 172KB)
ø0.075 Ultra Micro-Hole Drilling Performance (jpca2009_0.075.pdf, Page1, 172KB)
ø0.080 Ultra Micro-Hole Drilling Performance (jpca2009_0.080.pdf, Page1, 204KB)
ø0.090 Ultra Micro-Hole Drilling Performance (jpca2009_0.090.pdf, Page1, 197KB)

Package Substrate, Core Material for HDI
ø0.10 Micro-Hole Drilling Performance (jpca2009_0.10.pdf, Page1, 258KB)
ø0.15, ø0.20 Micro-Hole Drilling Performance (jpca2009_0.15-0.20.pdf, Page1, 191KB)
ø0.25 Micro-Hole Drilling Performance (Halogen Free Material) (jpca2009_0.25.pdf, Page1, 227KB)
ø0.30 Micro-Hole Drilling Performance (Halogen Free Material) (jpca2009_0.3.pdf, Page1, 203KB)

Flexible PCB
FX ø0.12, ø0.15 Micro-Hole Drilling Performance (jpca2009_fx.pdf, Page1, 228KB)

Measuring Equipment *Japanese only
Measuring Equipment Line Up for PCB Drills (jpca2009_lineup.pdf, Page1, 212KB)
Non-Contact Measuring Equipment mounted Drilling Machine (jpca2009_tp-fa.pdf, Page1, 136KB)

Re-pointing *Japanese only
Re-pointing service (jpca2009_repoint.pdf, Page1, 139KB)